Custom Parts and Product Assembly in China
Davantech manufactures custom metal and plastic parts in Dongguan, China, and assembles them into finished products or subassemblies. We can work with components you supply, source additional components, and carry out testing and packaging to your requirements.
Request a quote for parts or assembly. Send drawings and quantities for individual parts. For a complete assembly, include your bill of materials and assembly drawings.

Our estimate for suitable projects versus equivalent work in Belgium at the same volume, with matching testing and packaging.
Access to China’s dense component supply chain means faster sourcing and fewer stock-outs.
Component manufacturing, assembly, testing, and packaging handled by a single supplier, eliminating coordination overhead.
We support pilot runs from 500 units and plan production volumes around your assembly and delivery schedule.
ISO 9001:2015 processes, incoming inspection, FAI, functional testing, and full traceability on every order.
A single point of contact manages your order from quote to delivery, in English.
In-House Component Manufacturing
We make custom parts using CNC machining in China, insert molding, overmolding, and plastic injection molding. We can supply these parts on their own or as part of an assembly.
Verified Supplier Network
For electronic components, fasteners, cables, and standard hardware, we source from audited Chinese suppliers. Every incoming batch inspected before use.
Prototype to Mass Production
We support your full product lifecycle. Prototype validation, pilot production, and volume ramp-up all managed by the same team under the same quality system.
Custom Packaging & Labeling
Retail packaging, OEM-neutral boxes, branded inserts, or bulk packing. We configure output to match your market and logistics requirements.
Core Services
Our Product Assembly Capabilities
Davantech provides mechanical assembly, electromechanical assembly, and final assembly. We can join parts into a subassembly or build, inspect, and pack the finished product to your specifications.

Mechanical Assembly
We join plastic and metal components using screws, press fits, snap fits, rivets, adhesives and ultrasonic welding. Typical work includes enclosures, brackets and structural subassemblies. See our mechanical assembly example.
- Screw Assembly
- Press Fit
- Ultrasonic Welding
- Adhesive Bonding

Electromechanical Assembly
We integrate motors, sensors, switches and connectors into mechanical assemblies. This can include wiring, termination and functional checks. See our electromechanical assembly example.
- Motor Integration
- Sensor Mounting
- Connector Wiring
- Functional Testing

Final Assembly
Complete build of finished products. Integrating all sub-assemblies, wiring, installing firmware, performing final functional and cosmetic inspection, and packing to your specification for retail or distribution.
- Sub-system Integration
- Wiring
- Firmware Loading
- Final QC
IN-HOUSE PARTS
Injection molding, insert molding, CNC machining and cable assemblies. Manufactured in our own facility
COMPONENT SOURCING
Electronics, fasteners, cables sourced from our audited supplier network
PRODUCT ASSEMBLY
All three assembly types with in-line QC and functional verification
PACKING & SHIPPING
Custom packaging, labeling, and worldwide delivery with full documentation
Our Assembly Process
A transparent, six-step workflow, from your first inquiry to finished goods at your warehouse. You have a single point of contact throughout, with regular status updates at each milestone.
Why Choose Davantech for Product Assembly?
China remains the world’s leading location for product assembly. Not just because of lower labor costs, but because of its unmatched supply chain density, manufacturing infrastructure, and the quality standards now achieved by certified manufacturers like Davantech.
TOTAL COST
Compare the Complete Assembly Cost
Compare equivalent bills of materials, sourcing, assembly, inspection, packaging and freight before selecting a supplier.
Shorter lead times for PCBs, connectors, fasteners, and electronics.
Daily sea and air freight connections to every major market.
Toolmakers, platers, printers, and packers all within hours of our factory.
Rapidly scale production volume up or down in response to demand without retooling.
| Factor | China (Davantech) |
|---|---|
| Assembly Labor Cost | Quoted against your BOM and assembly scope |
| Component Lead Times | Faster: dense local supply chain |
| Quality Standard | ISO 9001:2015 certified |
| Manufacturing & Tooling Support | In-house injection molding and CNC; tooling through qualified partners |
| Minimum Order Qty | From 500 units |
| Communication Language | English-speaking team |
| Worldwide Shipping | Yes, sea, air, express courier |
| Inspection Reports | Full traceability on request |
Parts We Make for Your Assembly
- CNC Machining · Housings, brackets and shafts
- Insert Molding · Threaded inserts and metal contacts
- Overmolding · Strain reliefs and sealed connectors
- Plastic Injection Molding · Enclosures and structural parts

Applications & Industries
Davantech assembles products for demanding industries worldwide: wherever a combination of precision manufacturing, certified quality, and reliable supply chain management is required.
AUTOMOTIVE
- Sensor & actuator assemblies
- Control module integration
- Cable harness assemblies
- Interior trim sub-assemblies
ELECTRONICS & IOT
- Smart home device assembly
- IoT sensor module kitting
- PCB enclosure integration
- Consumer electronics units
MEDICAL
- Diagnostic device assembly
- Wearable health monitor kits
- Fluid management systems
- Surgical tool sets
INDUSTRIAL EQUIPMENT
- Pneumatic & hydraulic assemblies
- Control panel integration
- Sensor probe sub-assemblies
- Machine component kits
TELECOM & NETWORK
- Network device assembly
- Antenna system integration
- Fibre optic kit assembly
- Rack-mount equipment
CONSUMER PRODUCTS
- Power tool assembly
- Portable device kitting
- Battery pack assemblies
- Retail-ready product packs
Manufacturing Capabilities
Our assembly facility is equipped for a wide range of product types, order volumes, and complexity levels, from simple mechanical kits to multi-stage electromechanical assemblies.

| Parameter | Specification |
|---|---|
| Minimum Order Quantity | 500 units |
| Annual Capacity | Confirmed after review of assembly, testing requirements, and delivery schedule |
| Production Lead Time | 3–6 weeks after approval |
| Prototype Lead Time | 30–45 days, incl. electronics |
| Quote Turnaround | Reply target: 24 hours. Quote schedule confirmed after review. |
| BOM Sourcing | Full or partial (consignment) |
| Quality Standard | ISO 9001:2015 |
| Testing | Functional, AOI, ICT, hi-pot |
| Packaging Options | Retail, OEM, bulk, FBA |
| Shipping | Worldwide: sea, air, express |
We replace multiple vendors, part manufacturer, assembler, tester, packer, with a single accountable partner.
We manufacture injection-molded, insert-molded, and CNC-machined components. No dependency on external suppliers for core parts.
Direct communication in English from quote to delivery. No intermediaries, no translation delays.
Every batch is traceable from incoming components through production to outgoing shipment. Full documentation available on request.
We support pilot orders and ongoing production under the same quality system.
We operate under NDA and take intellectual property protection seriously. Your designs and data remain confidential.
We use digital assembly instruction software Asytra Trace to instruct the assembly operators, perform QC checks and to record every step of every serial number.
Built-In Quality
Every part verified against your drawing before shipment. Our ISO 9001:2015 QMS governs every step from incoming material to outgoing inspection.

One-stop shop
DFM | Manufacturing | Assembly
500+ customers served
OEM | Small series | Mass production
On-Time Delivery
Express | Cargo | Sea freight
Product Assembly in China FAQs
What types of products can you assemble in China?
We assemble mechanical and electromechanical products and devices, including assemblies that combine CNC-machined parts, plastic housings, cable assemblies, connectors, and integrated electronics.
Do you provide complete box-build and final assembly?
Yes. We support full box-build and final assembly, including sub-assemblies, wiring and cable integration, final fit and finish, functional testing (as specified), and packaging.
Can you source components as part of the assembly service?
Yes. We can support component sourcing based on your BOM and specifications, and we perform incoming checks to verify parts before they enter production.
How do you ensure quality control during product assembly?
Quality control typically includes incoming inspection of parts, in-process checks during assembly, and final inspection or functional testing based on your requirements. Documentation and inspection criteria can be aligned with OEM expectations.
Can you assemble products that include CNC machining, injection molding, and overmolded parts?
Yes. We can integrate CNC-machined components, injection-molded housings, and overmolded parts into complete mechanical or electromechanical assemblies to reduce supplier complexity and improve coordination.
Do you support prototyping and pilot builds before production?
Yes. We support prototype and pilot builds to validate assembly steps, fixtures, test methods, and packaging before moving to low- or mid-volume production.
How do you protect IP and customer design files?
We can work under NDA and handle customer files securely with restricted access for project-specific engineering and production teams.
Complete Manufacturing Solutions
Product assembly is one part of Davantech’s full manufacturing capability. We produce the components you need to assemble. All under one ISO-certified roof.
Precision Machining
CNC MACHINING
Precision CNC turned and CNC milled metal and plastic parts for structural, functional and cosmetic assemblies
Metal-Plastic Parts
INSERT MOLDING
Connectors with metal contacts, threaded inserts and Insert molded PCB. Manufactured in-house for direct use in assembly.
Plastic Manufacturing
INJECTION MOLDING
Custom made plastic parts, used for electronic enclosures and structural components. Single and multi-cavity steel molds.
Request a Quote for Parts or a Complete Assembly
Send your drawings and target quantities. If you also need assembly, include your bill of materials, tell us which components you’ll supply, and note any testing or packaging requirements. We aim to reply within 24 hours and will confirm the quote schedule after reviewing the scope.