CNC machining parts
Read this guidelines in order to design good CNC machining parts.
For each face to be machined, we have to reposition the part onto the machine. This increases the set-up time and expenses of CNC machining parts. In addition, it induces the chance to get deviations between machined features on different surfaces. Our advice is to reduce the number of machined faces. However, we can use 4-axis and 5-axis milling machines to solve that matter partially.
Internal corners radii:
The smaller the internal radii in a part, the smaller the cutting tools. Smaller mills result in more milling passes to remove material. As a result, we get an increase in machining time and expense. Therefore, it is best to design parts with bigger fillets. In this way we can mill with larger tools in order to speed up the machining process.
Depth of the cavity:
CNC mills have a limited depth to operate. In addition, the longer the mill compared to its diameter, the more chance it has to start vibrating. As a result, the machined surface is not smooth. Our advice here is to avoid creating a design that cannot be machined. Therefore, limit the depth of internal cavities to four times the tool diameter.
Alignment of machined features:
The less the cutting tool has to change position, the faster it will finish its job. To clarify, the shapes and contours to be machined determine the programming time as well as the machining time. In addition, the more complex a part becomes, the more expensive the fabrication. Our advice is to keep a design simple and strive to symmetry.
Drawings vs 3D files:
Nowadays design engineers tent to only send 3D files to their supplier, in order to get a quotation or get the parts fabricated. As a result, often features such as treaded holes are missing. Our advice is to add a manufacturing drawing to your CAD model. In this way, it helps the calculators as well as the programmers to save time. Good drawings also help to eliminate mistakes. Our recommendation is to have a fabrication drawing which include dimensions, tolerances, notes with surface finish and treaded holes.
There are the machine tolerances, standard tolerances and specific tolerances which are usually narrow and thus more difficult to control. Parts with narrow tolerances are produced slower and there is a chance to have fall-out, resulting in higher costs. Among other guidelines to design machining parts, our advice here is to always verify whether it is really necessary to put narrow tolerances on a certain dimension. Often, designers put tolerances to be certain or because of repetitiveness without considering the higher cost of the part. Modern machinery already fabricate parts with very precise dimensions.
Materials and surface treatment:
Raw materials are now more expensive and the prices are volatile. Therefore, materials that are easier to machine reduce the overall cost of your product. Depending on the use of the part, it is possible it needs surface treatment. Therefore, it can be useful to consider a material which does not require such treatment. Our advice is to select the materials carefully and consider how easy it is to process and if it requires any surface treatment. If a part does not need any finish, then don’t ask for it.
The best way to get good cnc machining parts within the shortest possible time is to cooperate with a machining partner who also has the experience to design products. They know the best what their machines and personnel are capable of.
At Davantech, quality and customers satisfaction comes first. First of all, we follow our ISO9001:2015 procedures throughout the entire process from order over manufacturing to shipping. Next, we determine tolerances and accuracy based on the customers information. This information is delivered to us in the form of production drawings and 3D files. Next, we inform …
Absolutely ! We welcome our customers and potential new customers to visit our factory in Zhangmutou, Dongguan. Because, our policy is very open. We are glad to show our way of working which is slightly different than in an average Chinese factory. More specifically, because we are influenced by our Belgian general manager. Furthermore, we …